When replacing tires, be sure to purchase the original size or an acceptable substitute size.  Click on your rim size to view a table listing substitute tire sizes.

General Rules for Replacing Tires

Replacement tires must have:

• load carrying ability equal to or greater than required by vehicle placard
• inflation pressure capability equal to or greater then the pressure specified by manufacturer

Tire Mixing

• it is prefered that all 4 tires be the same size, speed rating, and construction (radial or bias)
• match tire size designations in pairs on an axle, except for temporary use of a spare tire
• if 2 radial and 2 non-radial tires are used, put the radials on the rear axle
• snow tires should be applied in pairs to the drive axle (front or rear) or to all 4 positions
• when studded snow tires are mounted on the front, they also must be mounted on the rear
• match tire sizes and constructions on 4-wheel drive vehicles

Rim and Wheel Selection

• mount tires only on approved rim widths
• always check to be certain that the diameter designation for both tire and rim are the same.  For example:  a P225/75R15 tire must be mounted on a 15" rim

For Tires, We Are It!  We Deal!!!      Thank you for being visitor
Low, Low Prices          Sale day, Everyday              All prices subject to change without notice!